Gas Safe Registered: 553677 | Worcester Bosch Accredited Installer

0772 286 6616

Immersion Heaters & No Hot Water

Immersion Heaters & No Hot Water

An immersion heater is an electric element fitted inside your hot water cylinder. It acts as a backup — or in some homes, the primary — source of hot water. Here's what to do if yours stops working.

How does an immersion heater work?

An immersion heater works like a large electric kettle element, heating the water directly inside the cylinder. It is controlled by a thermostat and a timer, and can be used as the sole source of hot water or as a backup when the boiler is not running.

Immersion heaters are common in homes with conventional boiler systems and in properties without gas. They are also useful as a backup during boiler breakdowns.

Common immersion heater faults

The most common faults are a failed element (which stops the water heating), a faulty thermostat (which can cause the water to overheat or not heat at all), or a tripped circuit breaker.

If your hot water has stopped working and your boiler appears to be running normally, the immersion heater element or thermostat may need replacing. These are relatively inexpensive parts and the job is usually straightforward.

No hot water at all?

If you have no hot water and your boiler is not firing, the fault may be with the boiler itself, the motorised valve, the cylinder thermostat, or the programmer. David can diagnose the cause quickly and advise on the most cost-effective repair.

Do not attempt to work on gas components yourself. Call a Gas Safe registered engineer — David is Gas Safe registered (No. 553677) and covers the Surrey area.

Need help with your heating?

Call Dave for honest, professional advice — no obligation, no call centres.